Rancang Bangun Robot Pengantar Obat dan Makanan Pasien Berbasis Internet of Things
Abstract
The rapid development of technology today, especially in the field of information technology, requires everyone to be able to follow it so as not to be left behind by other developing countries, especially regarding the use of technology. The goal to be achieved from this research is to design a robot that can ease the work of medical personnel, especially in delivering medicine and food to patients so that they no longer need to deliver it manually, just use a robot controlled by an application. The research method used is the waterfall method. Robot testing is done by testing the control distance to find out how far the robot can be controlled. This robot consists of 3 layers and has 4 wheels. The working system of this robot is controlled by 4 buttons namely forward, backward, left and right by the user through a control application. The command is sent to the NodeMcu Esp8266 which is then forwarded to the Motor Driver L298n as the overall voltage of the system is made to work properly.
References
. Afandi, A. dan Afifah, F. (2018) “Iot Berbasis Sistem Smart Home Menggunakan Nodemcu V3, 3(2). Universitas 17 Agustus 1945 Jakarta..
. Ahmad, A. dan Zawil Aqli, M. (2020) “Sistem Informasi Rekam Medik Pasien (Studi Kasus Klinik Seulanga Tapak Tuan Aceh Selatan),” Journal Informatic, Education and Management, 2(1), hal. 1–10.
. Al-Fedaghi, S. (2021) “Validation: Conceptual versus Activity Diagram Approaches", International Journal of Advanced Computer Science, 12(6), hal. 287–297. doi: 10.14569/IJACSA.2021.0120632.
. Amaliyyah, R. (2021) “Perancangan Peragkat Lunak Untuk Menggambar Diagram Berbasis Android,” Jurnal Syntax Literate, 6(6), hal. 6. doi: 10.36418/syntax-literate.v6i6.1404.
. Amin, M., Ananda, R. dan Eska, J. (2019) “Analisis Penggunaan Driver Mini Victor L298N Terhadap Mobil Robot Dengan Dua Perintah Android Dan Arduino Nano", Jurnal Teknologi dan Sistem Informasi, 6(1), hal. 51–58. doi: 10.33330/jurteksi.v6i1.396.
. Arief, P. Z. dkk. (2020) “Pintu Gerbang Otomatis Berbasis Mikrokontroler Arduino Uno R3", Jurnal Teknik dan Sistem Komputer, 1(1), hal. 22–27. doi: 10.33365/jtikom.v1i1.76.
. Christanto, I. D. dkk. (2021) “Mirroring the KWH Meter Display to Monitor Electric Power Consumption Using the ESP32-CAM Microcontroller,” Jurnal Bumigora Information Technology, 3(2), hal. 161–174. doi: 10.30812/bite.v3i2.1613.
. Dalimunte, B. dan Sitorus, P. (2021) “Pengembangan Prototype Traffic Light Mikrokontroler Berbasis Rduino Mega Pada Mata Pelajaran Teknik Pemrograman Mikroprosesor Dan Mikrokontroler Di Smk Negeri 1 Percut Sei Tuan", Journal of Electrical Vocational Teacher Education, 1(1), hal. 10. doi: 10.24114/jevte.v1i1.25042.
. Darmanto, I. A. (2020) “Inovasi Sistem Robotika Pada Perpustakaan,” Journal of Electrical Engineering and Computer, 2(2), hal. 13–16. doi: 10.33650/jeecom.v2i2.1185.
. Dewantoro. D. W (2020) “Rancang Bangun Lengan Robot Pemilah Barang Berdasarkan Berat dengan Pemanfaatan Internet Of Things (IoT) Sebagai Kontrol Dan Monitoring Jarak Jauh", Jurnal Elektro S1 ITN Malang, 21(1), hal. 1–9.
. Dewi Lusita Hidayati Nurul, R. dan F mimin, Z. D. (2019) “Prototype Smart Home Dengan Modul Nodemcu Esp8266 Berbasis Internet of Things (Iot)", Jurnal Teknik Informatika, hal. 3.
. Fahmawaty, M. dan Royhan, M. (2020) “Perancangan Alat Penghitung Jumlah Pengunjung Di Perpustakaan Unis Tangerang Menggunakan Sensor Pir Berbasis IoT,” 1(November), hal. 253–261.
. Fezari, M. dan Dahoud, A. Al (2018) “Integrated Development Environment ‘ IDE ’ For Arduino,” ResearchGate, (Oktober), hal. 1–12.
. Habibullah, M. dkk. (2020) “Rancang bangun aplikasi pemandu wisata museum sumbawa berbasis android dengan memanfaatkan quick response code (qr code),” Jurnal JINTEKS, 2(2), hal. 136–145.
. Hartopo, H. dan Fahlevy, R. (2020) “Pembuatan Alat Bantu Visual Pada Helikopter Pendaratan Darurat,” 9(1).
. Husni, N. L. dkk. (2019) “Pengaplikasian Sensor Warna Pada Navigasi Line Traking Robot Sampah,” Ampere, 4(2), hal. 297–306.
. Irfan, Hafidhin, M. dkk. (2020) “Alat Penjemuran Ikan Asin Berbasis Mikrokontroler Arduino UNO", Jurnal Teknik dan Sistem Komputer, 1(2), hal. 26–33. doi: 10.33365/jtikom.v1i2.210.
Copyright (c) 2023 Edy Sopyan, Dedi Suarna, Muhammad Harun Ashar, Mustakim

This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).


.png)
.png)


