Rancang Bangun Hand Sanitizer Otomatis Berbasis Mikrokontroler

  • Iwan Purnama * Mail Universitas Labuhanbatu, Indonesia
  • Rizki Hariandi Institut Agama Islam Tebo, Indonesia
  • Nurhayati Sekolah Tinggi Agama Islam Negeri (STAIN) Bengkalis, Indonesia
  • Fauzan Azim Universitas Muhammadiyah Riau, Indonesia
DOI: https://doi.org/10.47065/bit.v3i4.427
Keywords: Arduino, Hand sanitizer, Covid-19, Robotika, Mikrokontroller

Abstract

Hand washing is very important to keep hands and skin clean. Hand washing can be done by washing hands with soap and clean running water. To prevent the spread of the corona virus, the government urges the public to comply and be disciplined in implementing health protocols, one of which is by always washing hands using a hand sanitizer. The majority of hand sanitizers use conventional hand sanitizers, namely by directly touching the hand sanitizer bottle. The purpose of this research is to make an Arduino-based automatic hand sanitizer. This automatic hand sanitizer tool uses an Arduino Uno as a system controller, an ultrasonic sensor as a hand movement detector and a micro servo as an actuator to press the hand sanitizer bottle lever. This research produces an automatic hand sanitizer tool that can be used without having to touch the hand sanitizer bottle directly, thereby reducing the risk of transmission of Covid-19 when washing hands

References

N. H. Nasution and A. Hidayah, “Gambaran Pengetahuan Masyarakat Tentang Pencegahan Covid-19 Di Kecamatan Padangsidimpuan Batunadua, Kota Padangsidimpuan,” J. Kesehat. Ilm. Indones. (Indonesian Heal. Sci. Journal), vol. 6, no. 1, p. 107, 2021, doi: 10.51933/health.v6i1.419.

N. M. Ikmal and M. Noor, “Kebijakan Pemerintah Indonesia Dalam Penanganan Covid-19,” J. Litbang Provinsi Jawa Teng., vol. 19, no. 2, pp. 155–167, 2022, doi: 10.36762/jurnaljateng.v19i2.910.

M. Ngafifi, “Kemajuan Teknologi Dan Pola Hidup Manusia Dalam Perspektif Sosial Budaya,” J. Pembang. Pendidik. Fondasi dan Apl., vol. 2, no. 1, pp. 33–47, 2014, doi: 10.21831/jppfa.v2i1.2616.

I. Purnama, S. Z. Harahap, and A. A. Ritonga, “Rancang Bangun Tempat Sampah Otomatis Pada Universitas Labuhanbatu,” J. Inform., vol. 8, no. 2, pp. 81–84, 2020, doi: 10.36987/informatika.v8i2.1780.

I. Purnama, A. Ambiyar, F. Rizal, U. Verawardina, S. D. Raharjo, and A. Karim, “Mesin Penetas Telur Menggunakan Microcontroller ATMega328 Berbasis Arduino,” J. MEDIA Inform. BUDIDARMA, vol. 5, no. 2, p. 431, Apr. 2021, doi: 10.30865/mib.v5i2.2816.

Z. Lubis et al., “KONTROL MESIN AIR OTOMATIS BERBASIS ARDUINO DENGAN SMARTPHONE,” Online, 2019.

R. A. Sumarni, S. A. Kumala, and I. A. D. Astuti, “Pencegahan Tindak Kejahatan Pencurian dengan Alarm Anti Maling Sederhana di Lingkungan Masyarakat,” J. SOLMA, vol. 8, no. 2, p. 348, Oct. 2019, doi: 10.29405/solma.v8i2.3037.

E. Wijaya and B. K. Yakti, “PROTOTIPE SISTEM PARKIR KENDARAAN DENGAN RFID BERBASIS ARDUINO UNO R3,” J. Ilm. Teknol. dan Rekayasa, vol. 23, no. 1, pp. 26–37, 2018, doi: 10.35760/tr.2018.v23i1.2448.

Sugiyono. 2014. Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta.

www.MetaverseTrainingIndonesia.com

Dimensions Badge
Published
2022-12-27
How to Cite
Purnama, I., Hariandi, R., Nurhayati, & Azim, F. (2022). Rancang Bangun Hand Sanitizer Otomatis Berbasis Mikrokontroler . Bulletin of Information Technology (BIT), 3(4), 385 - 388. https://doi.org/10.47065/bit.v3i4.427
Issue
Vol 3 No 4: Desember 2022
Section
Articles

Copyright (c) 2022 Iwan Purnama, Rizki Hariandi, Nurhayati, Fauzan Azim

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).