Implementasi Robot Mobile Dual Mode Berbasis Arduino Uno sebagai Media Pembelajaran Ekstrakulikuler Robotik
- Nazil Fikri Hidayatullah Universitas Bina Bangsa, Indonesia
- Abdul Halim Universitas Bina Bangsa, Indonesia
- Rudianto Universitas Bina Bangsa, Indonesia
-
Mochammad Darip
*
Universitas Bina Bangsa,
Indonesia
Abstract
The advancement of robotics technology offers significant opportunities to enhance practice-based learning in vocational education. However, the implementation of robotics learning at the vocational high school (SMK) level still faces limitations in interactive learning media and low student engagement. This study aims to develop and evaluate a dual-mode mobile robot based on Arduino Uno as a learning medium for robotics extracurricular activities at SMK Negeri 11 Kabupaten Tangerang. The research method employs a Research and Development (R&D) approach with a prototyping model, including problem identification, system design, implementation, testing, and evaluation stages. The developed system integrates two operational modes: an automatic mode (obstacle avoider) and a manual control mode using Bluetooth communication. The results indicate that the system operates stably and responsively, with an average response time of less than one second and acceptable sensor accuracy. Learning evaluation through questionnaires shows an improvement in student interest and understanding, with scores above 78%. This study contributes to the development of interactive and practical robotics-based learning media, which enhances student engagement in the learning process.
References
H.-J. Lee and H. Yi, “Development of an Onboard Robotic Platform for Embedded Programming Education,” Sensors, vol. 21, no. 11, p. 3916, Jan. 2021, doi: 10.3390/s21113916.
N. Prokopiuk and P. Falkowski, “Applicability of Augmented and Virtual Reality for Education in Robotics,” Journal of Automation, Mobile Robotics and Intelligent Systems, pp. 65–74, 2022, doi: 10.14313/JAMRIS/3-2022/25.
H. Setyawan, Sukardi, Risfendra, D. T. P. Yanto, and T. T. Kiong, “The Impact of Robotic Technology in Vocational Education towards the Development of Industry 5.0: A Systematic Literature Review,” International Journal of Online and Biomedical Engineering (iJOE), vol. 21, no. 06, pp. 36–55, May 2025, doi: 10.3991/ijoe.v21i06.53681.
T. Tuwoso, A. B. N. R. Putra, and A. K. B. Muhammad, “The Innovation of Augmented Reality Learning Media with Interactive Component Model to Improve Special Ability of Vocational Education Knowledge in the Digital Era,” International Journal of Interactive Mobile Technologies (iJIM), vol. 15, no. 21, pp. 188–198, Nov. 2021, doi: 10.3991/ijim.v15i21.24833.
R. C. Subramaniam, N. Borse, A. Bralin, J. W. Morphew, C. M. Rebello, and N. S. Rebello, “Investigating the design-science connection in a multiweek engineering design-based introductory physics laboratory task,” Phys. Rev. Phys. Educ. Res., vol. 21, no. 1, p. 010118, Mar. 2025, doi: 10.1103/PhysRevPhysEducRes.21.010118.
S. Auliana, B. R. S. Permana, M. Darip, and S. C. Roy, “FuelGuard: Fuel Consumption Anomaly Detection and Visual Verification in Logistics Using Isolation Forest, CBIR, and OCR,” Jurnal Teknik Informatika (Jutif), vol. 6, no. 6, pp. 6017–6030, 2025, doi: 10.52436/1.jutif.2025.6.6.5276.
M. Darip, S. Auliana, B. R. S. Permana, and M. Ahwani, “Pengembangan Platform Digital untuk Meningkatkan Layanan Pengaduan dan Komunikasi Masyarakat Desa Singarajan,” Jurnal Darma Agung, vol. 33, no. 2, pp. 270–277, Apr. 2025, doi: 10.46930/ojsuda.v33i2.5320.
A. Suarez, D. García-Costa, J. Perez, E. López-Iñesta, F. Grimaldo, and J. Torres, “Hands-on Learning: Assessing the Impact of a Mobile Robot Platform in Engineering Learning Environments,” Sustainability, vol. 15, no. 18, p. 13717, Jan. 2023, doi: 10.3390/su151813717.
Y. Saltan and Ö. Korkmaz, “EĞİTİCİ ROBOT SETLERİNİN ETKİLİLİĞİ: 2010-2021 YILLARINI KAPSAYAN BİR META ANALİZ ÇALIŞMASI,” Eğitim Teknolojisi Kuram ve Uygulama (ETKU), vol. 14, no. 2, pp. 176–197, Jul. 2024, doi: 10.17943/etku.1358742.
E. D. Purnama, S. Auliana, B. R. S. Permana, A. Safaatulloh, and W. Cahyadi, “Penerapan Framework Laravel Untuk Sistem Informasi Raport Online Pada SDN Saruni 2 Pandeglang,” INFOTECH journal, vol. 10, no. 2, Art. no. 2, Aug. 2024, doi: 10.31949/infotech.v10i2.10869.
Rudianto, A. Sapaatullah, B. R. S. Permana, and M. Darip, “Implementasi Struktur Data Array dalam Sistem Perpustakaan Berbasis Web dengan Python Flask,” Buletin Ilmiah Informatika Teknologi, vol. 3, no. 2, pp. 30–36, Jan. 2025, doi: 10.58369/biit.v3i2.91.
H. Hamdan, O. Romli, S. Auliana, and B. R. S. Permana, “Utilization of Virtual Assistance (Chatbot) for an Integrated Information Portal as Part of a Marine Tourism Promotion Strategy in Banten.,” JINAV: Journal of Information and Visualization, vol. 5, no. 2, pp. 206–219, Dec. 2024, doi: 10.35877/454RI.jinav3056.
M. Darip and A. Sapaatullah, “a Rancang Bangun Aplikasi Perjalanan Dinas Guna Meningkatkan Efisiensi dan Optimalisasi Administrasi: Rancang Bangun Aplikasi Perjalanan Dinas Guna Meningkatkan Efisiensi dan Optimalisasi Administrasi,” Jurnal Ilmiah Media Sisfo, vol. 19, no. 1, pp. 50–62, Apr. 2025, doi: 10.33998/mediasisfo.2025.19.1.2033.
M. Masyhuri and D. Darip, “Analisis Dan Desain Aplikasi Perpustakaan Untuk Transformasi Pembelajaran Di SMK Malnu Menes,” BETRIK, vol. 16, no. 01, pp. 11–24, Jun. 2025, doi: 10.36050/ag0s0c52.
M. Darip and B. R. S. Permana, “Analysis and Design of a Sales Application System for Micro-Scale Grocery Stalls,” Journal of Advances in Information and Industrial Technology, vol. 6, no. 1, pp. 11–20, May 2024, doi: 10.52435/jaiit.v6i1.536.
M. Darip, N. Supiana, and S. Makin, “Penggunaan Algoritma Round Robin Dalam Manajemen Kemitraan Dan Reservasi Kendaraan Bagi Wisatawan Di Provinsi Banten,” IJIS - Indonesian Journal On Information System, vol. 9, no. 2, Art. no. 2, Sep. 2024, doi: 10.36549/ijis.v9i2.322.
J. R. Qu and P. K. Fok, “Cultivating students’ computational thinking through student–robot interactions in robotics education,” Int J Technol Des Educ, vol. 32, no. 4, pp. 1983–2002, Sep. 2022, doi: 10.1007/s10798-021-09677-3.
H.-J. Lee and H. Yi, “Development of an Onboard Robotic Platform for Embedded Programming Education,” Sensors, vol. 21, no. 11, p. 3916, Jan. 2021, doi: 10.3390/s21113916.
F. A. Nannim, N. E. Ibezim, M. Mosia, and B. C. E. Oguguo, “Project-based learning with arduino robots: impact on undergraduate students’ achievement and task persistence in robotics programming,” Front. Robot. AI, vol. 12, Jul. 2025, doi: 10.3389/frobt.2025.1615427.
Copyright (c) 2026 Nazil Fikri Hidayatullah, Abdul Halim, Rudianto Rudianto, Mochammad Darip
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).
.png)
.png)
