Rancang Bangun Prototype Home Security System Menggunakan RFID Berbasis SMS Gateway dan Notifikasi Telepon
-
Aidilvi Prya Pratama Azwar
*
Universitas Harapan Medan,
Indonesia
- Arnes Sembiring Universitas Harapan Medan, Indonesia
- Kalvin Chiuloto Universitas Harapan Medan, Indonesia
Abstract
This study develops RFID technology for a home security system, which is to make a home security system that is minimal in error and is also more stringent than just security that is carried out in general. By utilizing RFID technology coupled with a magnetic switch sensor based on SMS gateway and telephone notification, it is hoped that this research will produce a prototype tool in the form of a home security system. This prototype will be made using an Arduino Nano-based microcontroller which will be connected to several sensors and modules. The test results show that this system can provide accurate information to homeowners and can open doors with an RFID key.
References
Tempongbuka, Kendek Allo, U A Sompie, (2015). Rancang Bangun Sistem Keamanan Rumah Menggunakan Sensor PIR (Passive Infrared) Dan SMS Sebagai Notifikasi. Journal Teknik Elektro Dan Komputer.
Badan Pusat Statistik Provinsi Sumatra Utara. (2019). Tabel Statistik Kasus Pencurian di Provinsi Sumatera Utara. Diakses dari https://sumut.bps.go.id/subject/34/politik-dan-keamanan.html.
Tempongbuka, Kendek Allo, U A Sompie, (2015). Rancang Bangun Sistem Keamanan Rumah Menggunakan Sensor PIR (Passive Infrared) Dan SMS Sebagai Notifikasi. Journal Teknik Elektro Dan Komputer.
Tambunan, Hamdani, Tumanggor. (2021). Sistem Keamanan Rumah dengan Menggunakan Rancangan Mikrokontroler. SINTAKSIS: Jurnal Ilmiah Pendidikan.
A. Z. Hasibuan, I. Faisal, and R. Simatupang, “Sistem Pengereman Otomatis Pada Mobil dengan Memanfaatkan Mikrokontroler Menggunakan Fuzzy Sugeno,” 2017.
Putra, B. T. W.(2020). Internet of Things (IoT) untuk Pertanian. Digital Repository Universitas Jember.
Marshall (2022). RC522 RFID Module: Pin Configuration, Arduino, Datasheet. Diakses dari https://www.easybom.com/blog/a/rc522-rfid-module-arduino-module-pin-configurations-tutorial
Asgar Irmawan, Andi Fatfa. (2017). Rancang Bangun Sistem Keamanan Rumah Dengan Dua Tingkat Pengamanan Menggunakan RFID dan Password.
Permana, E., & Hidayat, R. (2017). Rancang Bangun Sistem Keamanan Rumah Berbasis Sms Gateway Menggunakan Mikrokontroler. Jurnal Teknologi Informasi dan Komunikasi ISSN.
Affrilianto, R., & Dedi Triyanto, S. (2017). Rancang Bangun Sistem Pelacak Kendaraan
Bermotor Menggunakan Gps Dengan Antarmuka Website. Coding Jurnal Komputer
dan Aplikasi.
Siswanto, S., Utama, G. P., & Gata, W. (2018). Pengamanan ruangan dengan Dfrduino Uno R3, sensor Mc-38, pir, notifikasi SMS, twitter. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 2(3), 697-707
Gaveri Pratama, R. (2019). RANCANGAN SISTEM PENGUNCI RUMAH BERBASIS ARDUINO UNO R3 DENGAN RADIO FREQUENCY IDENTIFICATION (RFID) DAN SELENOID DOOR LOCK. Ubiquitous: Computers and Its Applications Journal, 2(1), 45–50.
Genaldo, R., Septyawan, T., Surahman, A., & Prasetyawan, P. (2020). Sistem Keamanan Pada Ruangan Pribadi Menggunakan Mikrokontroler Arduino dan SMS Gateway. Jurnal Teknik Dan Sistem Komputer
Fadli Bima Prakarsa. (2022). Rancang Bangun Alat Sortir Panen Ikan Lele Berbasis Arduino Uno R3.
Mulyati Sri, Sumardi. (2018). INTERNET OF THINGS (IoT) PADA PROTOTIPE PENDETEKSI KEBOCORAN GAS BERBASIS MQ-2 dan SIM800L.
Nazarudin, A., & Nuryadi, S. (2018). Sistem Kendali Pintu Dan Peralatan Listrik Otomatis Dengan Sensor Pir Dan SMS Gateway Sebagai Pengunci Sistem (Doctoral dissertation, University of Technology Yogyakarta)
Ramdhan (2019). Pengertian Adaptor, Fungsi dan Kegunaan Adaptor. Diakses dari https://djonews.com/pengertian-adaptor-serta-fungsi-dan-kegunaan-adaptor/
Saleh, M., & Haryanti, M. (2017). Rancang bangun sistem keamanan rumah menggunakan relay. Jurnal Teknologi Elektro, 8(2), 87-94.
Copyright (c) 2023 Aidilvi Prya Pratama Azwar, Arnes Sembiring, Kalvin Chiuloto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors retain copyright and grant the EXPLORER right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in EXPLORER.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in EXPLORER.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
.png)
