Prototype Robot Pengantar Barang Pengikut Marka Hitam Berbasis Mikrokontroller
- Yurico Herman Program Studi Teknik Informatika, Universitas Harapan Medan, Medan, Indonesia
- Ade Zulkarnain Hasibuan Program Studi Teknik Informatika, Universitas Harapan Medan, Medan, Indonesia
-
Arnes Sembirimg
*
Program Studi Teknik Informatika, Universitas Medan Area, Medan,
Indonesia
Abstract
Robotics has become an ever-growing field with increasingly diverse applications in various industries. One interesting application is the development of delivery robots that can follow specific paths on surfaces using black markings as a guide. This research aims to design and implement a microcontroller-based black mark following goods delivery robot prototype. This robot prototype uses a TCRT5000 sensor to read black markings placed on the bottom of the robot. Using this robot is very easy by providing a battery for the robot's power source. The TCRT5000 sensor is a reading sensor for following the path. The FC-51 IR sensor as an obstacle detection sensor is in front of the robot for temporary stops when the robot is walking. The TTP223B touch sensor calibrates the robot at the start and end of the robot's work, inputting the additional number of stops when the robot is in a temporary state. This robot is easy to use because the operation is easy to understand, making the robot easy for ordinary people to use.
References
M. Basri and I. Wahira, “Robot Line Follower Pemindah Barang Bedasarkan Warna Berbasis Mikrokontrolleer,” JURNAL MOSFET, vol. 2,no. 2, pp. 11-15, 2022.
A. Z. Hasibuan and M. S. Asih, “Rancang Bangun Robot Vacum Cleaner Berbasis Mikrokontroler dengan Pengendali Smartphone Android,” InfoTekJar, vol. 4,no. 1, pp. 116-120, 2019.
N. E. Budiyanta, H. Tanudjaja and M. Mulyadi, “Rancang Bangun Robot Line Follower Portable Sebagai Upaya Minimalisasi Sampah Elektronik di Ranah Robotika,” TESLA, vol. 22, no. 2 , pp. 148-156, 2018.
Yudianingsih, E. L. Utari, I. Mustiadi and M. W. A. Mustafa, “Sistem Perancangan Robot Pemindah Barang Berbasis Line Follower,” Jurnal Teknologi Informasi, vol. 17, no. 1, pp. 36-43, 2022.
M. S. Asih, A. Z. Hasibuan and N. I. Syahputri, “Pendingin Otomatis Akuarium Menggunakan Mikrokontroler,” JUTIKOMP, vol, 1, no.1, pp. 66-70, 2018.
A. Zein, “Pengolaan Sistem Parkir Dengan Menggunakan Long Range RFID Reader Berbasis Arduino Uno,” JIK, vol. 6,no. 2, pp. 32-37, 2023.
A. N. A. Setiawan, ”Rancangan Bangun Prototipe Pograam Cerdas Perpakiran Mobil Memanfaakan TCRT5000 Berbasis Arduino Dengan Kendali Terpusat,” Portaldata, vol. 1,no. 3, pp. 1-20, 2021.
Ta'ali, W. Khairat, Habibullah and J. Sardi ,“Pengaruh Jarak Terhadap Sensitivitas Sensor Warna TCS3200,” JTEIN, vol. 4,no. 1, pp. 67-74, 2023.
Muhammad, M. Manfaluthy, and A. O. Putri, “Rancang Bangun Sistem Parking Kampus Jakarta Global University Dengan Monitoring Via Aplikasi JGU-Parking,” Prosiding Seminar Nasional Sains dan Teknologi vol. 13,no. 1, pp. 348-364, 2023.
M. S. Yoski and R. Mukhaiyar, “Prototipe Robot Pembersih Lantai Berbasis Mikrokontroller dengan Sensor Ultrasonik,” JTEIN, vol. 1,no. 2, pp. 158-161 2020.
S. Arsella, M. Fadhli and Lindawati, “Optimasi Pertumbuhan Jamur Tiram Melalui Monitoring Suhu dan Kelembaban Menggunakan Teknologi IoT,” Jurnal RESISTOR, vol. 6,no. 1, pp. 34-42, 2023.
M. I. Esario and M. Yuhendri, “Kendali Kecepatan Motor DC Menggunakan DC Chopper Satu Kuadran Berbasis Kontroller PI,” JTEV, vol. 6,no. 1, pp. 296-305, 2020.
Kamal, Firdayanti, U. M. Tyas, A. A. Buckhari and Pattasang, “Implementasi Aplikasi Arduino IDE Pada Mata Kuliah Sistem Digital,” TEKNOS, vol. 1,no. 1, pp. 1-10, 2023.
B. Panjaitan and I. A. Iswandan, “Sistem Monitoring Ketinggian dan Kecepatan Banjir Melalui WEB dan Peringatan Dini Melaui Telegram Berbasis Node MCU,” Jurnal Ilmiah Fakultas Teknik LIMIT’S, vol. 18,no. 1, pp. 8-18, 2022.
A. S. Putra and A. Aribowo, “Penelitian Awal Perancangan Sistem Smart Hand Wash Assistant Menggunakan Aplikasi Tinkerrcad,” INFORMATION SYSTEM DEVELOPMENT, vol. 7,no. 2, pp. 50-54, 2022.
S. Thoha, B. Dwirastiaji and S. Samsugi, Monitring dan Kontrol Suhu Aquascape Menggunakan Arduino Dengan Sensor Suhu DS18B20,” Jurnal Ilmiah Mahasiswa Kendali dan Listrik, vol. 2,no. 2, pp. 75-83, 2021.
T. Sulistyorinia, N. Sofib and E. Sovac Pemanfaatan Node MCU ESP8266 Berbasis Android (BLINK) Sebagai Alat – Alat Mematikan dan Menghidupkan Lampu,” Junal Ilmiah Tenik (JUIT), vol. 1,no. 3, pp. 40-43, 2022.
Copyright (c) 2024 Yurico Herman, Ade Zulkarnain Hasibuan, Arnes Sembirimg
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors retain copyright and grant the EXPLORER right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgement of the work's authorship and initial publication in EXPLORER.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in EXPLORER.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
.png)
