Analisis Perbandingan Perhitungan Harga Pokok Produksi Menggunakan Metode Full Costing dan Variable Costing dalam Menentukan Harga Jual Pada UMKM
Abstract
This study aims to find out how the comparative analysis of the calculation of the cost of production in determining the selling price at Karisma Rahayu Sejati uses the variable costing and full costing methods. In this study, using a quantitative descriptive method. Sources of data used are primary data and secondary data. Interview, observation, and documentation techniques were used as data collection techniques. This study examines the calculation of the cost of production to determine the selling price of Karisma Rahayu Sejati. The problem is, Karisma Rahayu Sejati experienced a decline in sales after the selling price of their products was increased. So that in the calculation of the cost of production, there are still costs that are not included. The results of this study indicate that by using the full costing method the calculation of the cost of production is higher than the calculations made by Karisma Rahayu Sejati and using the variable costing method the calculation of the cost of production is lower. because by using the full costing method all cost elements, both variable costs and fixed costs are included and classified according to cost classification. So the most appropriate and efficient method is the full costing method.
References
Anggreani, S., & Adnyana, I. G. S. (2020). Penentuan Harga Pokok Produksi Dengan Metode Full Costing Sebagai Dasar Penetapan Harga Jual Pada UKM Tahu AN Anugrah. Jurnal Ilmiah Akuntansi Kesatuan, 8(1), 9–16. https://doi.org/10.37641/jiakes.v8i1.290
Atsar, A., & Fadlian, A. (2021). Sosialisasi Kegiatan Penyuluhan Umkm Mewujudkan Perekonomian Masyarakat Yang Mempunyai Potensi Dan Peran Strategis Menurut Undang-Undang No. 20 Tahun 2008. Dinamisia : Jurnal Pengabdian Kepada Masyarakat, 5(5), 1202–1210. https://doi.org/10.31849/dinamisia.v5i5.4142
Badriah, E., & Nurwanda, A. (2019). Penerapan Metode Full Costing Dalam Menentukan Harga Pokok Produksi Pembangunan Rumah. Jurnal Moderat, 5(November), 2442–3777.
Bungin, B. (2015). Analisis Data Penelitian Kuantitatif (PRG Persada, Ed.). PT. Raja Grafindo Persada.
Dede. (2021). Industri Terseok-seok, Kuliner Meroket Tajam. Pasundan Ekspres.Com. https://pasundan.jabarekspres.com/2021/01/26/industri-terseok-seok-kuliner-meroket-tajam/
Dewi, R., & Bahari, A. (2022). Analisis Perbandingan Harga Pokok Produksi Menggunakan Metode Full Costing Dan Variable Costing Dalam Penerapan Harga Jual Pada Dian Konveksi. Jurnal Tamwil, VIII, 35–46.
Febrianty, L., & Muchlis, S. (2020). Analisis Perbandingan Metode Full Costing Dan Variabel Costing Dalam Penetapan Harga Pokok Produksi (Studi Pada Perusahaan Daerah Air Minum Tirta Je’Neberang Kabupaten Gowa). ISAFIR: Islamic Accounting and Finance Review, 1(1), 71–83. https://doi.org/10.24252/isafir.v1i1.18326
Indrianto, N., & Supomo, B. (2013). Metodologi Penelitian Bisnis Untuk Akuntansi Dan Manajemen. BPEE-Yogyakarta.
Maslikah, S., Saskara, I. A. N., & Jember, I. M. (2018). Analisis Ekonomis Kelapa Dalam Di Kecamatan Mendoyokabupaten Jembrana. E-Jurnal EP Unud, 7(11), 2404.
Nafisah, N., Dientri, A. M., Darmayanti, N., & Winarno, W. (2021). Analisis Perhitungan Harga Pokok Produksi Dengan Metode Full Costing dan Variable Costing. 4(1), 1–15.
Nurhaliza, S. (2022). Begini Pentingnya Peran UMKM dalam Perekonomian Indonesia! Idxchannel.Com. https://www.idxchannel.com/economics/begini-pentingnya-peran-umkm-dalam-perekonomian-indonesia
Opendatajabarprov.go.id. (2023). Pertumbuhan UMKM Kuliner Kab. Karawang. https://opendata.jabarprov.go.id
Purwanto, E. (2020). Analisis Harga Pokok Produksi Menggunakan Metode Full Costing Dalam Penetapan Harga Jual. Journal of Applied Managerial Accounting, 4(2), 248–253. https://doi.org/10.30871/jama.v4i2.2402
Samsul, N. H. (2013). Penentuan Harga Jual Perusahaan Dengan Metode Full Costing Pada PT. Danliris Di Sukoharjo. Jurnal EMBA, 1(3), 366–373.
Sasongko, D. (2020). UMKM Bangkit, Ekonomi Indonesia Terungkit. Kementrian Keuangan Republik Indonesia. https://www.djkn.kemenkeu.go.id/artikel/baca/13317/UMKM-Bangkit-Ekonomi-Indonesia-Terungkit.html
Sastrohadiwiryo, S., & Syuhada, A. H. (2019). Manajemen Tenaga Kerja Indonesia Pendekatan Administratif dan Operasional (D. M. Listianingsih (ed.); 1st ed.). Bumi Aksara.
Sriyani, I. (2018). Analisis Perhitungan Harga Pokok Produksi Dengan Metode Full Costing dan Variable Costing (Issue 3). http://dx.doi.org/10.1186/s13662-017-1121-6%0Ahttps://doi.org/10.1007/s41980-018-0101-2%0Ahttps://doi.org/10.1016/j.cnsns.2018.04.019%0Ahttps://doi.org/10.1016/j.cam.2017.10.014%0Ahttp://dx.doi.org/10.1016/j.apm.2011.07.041%0Ahttp://arxiv.org/abs/1502.020
Sugiyono. (2017). Metode penelitian kuantitatif, kualitatif, dan R&D. bandung: Alfabeta (S. R. Yosita (ed.)). Bandung: Alfabeta.
Sumual, T. H., Ilat, V., & Mintalangi, S. S. . (2022). Analisis Perhitungan Harga Pokok Produksi Dengan Menggunakan Metode Full Costing. Jurnal Bening, 5(2), 1097–1102.
Suratno, & Yuliyanto, W. (2021). Analisis Perbandingan Harga Pokok Produksi Metode Full Costing Dan Variabel Costing Pada CV Gemilang Kencana Wonosobo. Jurnal E-Bis (Ekonomi-Bisnis), 5(1), 55–66. https://doi.org/10.37339/e-bis.v5i1.515
Copyright (c) 2023 Santi Median, Sihabudin, Robby Fauji
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (Refer to The Effect of Open Access).